BDMFF - SODIUM STANNATE

  • MSDS: BDMFF
  • Manufacturer: M AND T CHEMICALS INC
  • Product Name: SODIUM STANNATE
  • National Stock Number: 6810-00-239-0910
Product Identification

Product ID:SODIUM STANNATE
MSDS Date:01/01/1987
FSC:6810
NIIN:00-239-0910
MSDS Number: BDMFF

Responsible Party
M&T CHEMICALS,INC

Emergency Phone: 201-499-2445

Cage: KO780

Contractor
M&T CHEMICALS,INC
1104 RAHWAY, NJ 07065-1104 US

Cage: KO780

Ingredients

SODIUM STANNATE

CAS: 12058-66-1

RTECS: JN6345000

Fraction By Weight: >95%

ACGIH TLV: 2MG/CUM


SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: <5%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:MAY CAUSE IRRITATIN OF EYES,SKIN & RESPIRATORY
TRACT UPON CONTACT OR INHALATION

First Aid

First Aid:WASH THOROUGHLY WITH SOAP & WATER. REMOVE CONTAMINATED
CLOTHES.CALL A PHYSICIAN. LAUNDER CONTAMINATED CLOTHING BEFORE
RE-USE. FLUSH EYES WITH WATER AT LEAST 15 MIN.

Fire Fighting

Extinguishing Media:WATER SPRAY, FOAM, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:AVOID EYE & SKIN CONTACT DO NOT BREATHE FUMES
OR DUST
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:MAY BE INJURIOUS TO AQUATIC LIFE IF DISCHARGED
TO OPEN WATERS. SWEEP UP SPILLED MATERIAL. TRANSFER TO SUITABLE
CONTAINER FOR DISPOSAL OR RECOVERY FOR TIN CONTENT.

Handling

Handling and Storage Precautions:NORMAL WAREHOUSE STORAGE.WASH
THOROUGHLY AFTER HANDLING
Other Precautions:AVOID CONTACT WITH EYES,SKIN AND CLOTHING.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED
Ventilation:MECHANICAL(GENERAL)REQUIRED.LOCAL EXHAUST RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
CONTAINS 44.5% TIN

Chemical Properties

HCC:N1
NRC/State Lic Num:DATED NOV,85.
Spec Gravity:UNK
Solubility in Water:MODERATE
Appearance and Odor:WHITE-TAN CRYSTALS,CHARACTERISTIC ODOR.

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISSOLVE IN WATER, ADD ACID CAREFULLY TO
NEUTRALIZE TO PH7. DISCARD LIQUID TO SEWER AFTER COLLECTING SOLIDS
FOR RECOVERY OF TIN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.